Browsing Category: "Wireless access point"

TDM-C500 ADSL2 Modem Router Connects to Wireless Router or Access Point?

Wednesday, February 1st, 2012 | Wireless access point with Comments Off

Some individuals make mistakes in purchasing the wireless entry point (AP) to produce a wireless network in residence and share the broadband ADSL net connection with a lot of consumer computer systems inside of the household. They never realize that what they presently have in home is a modem (without the routing / NAT purpose). When the wireless AP connects to this modem, it results in a wireless LAN but only a single customer computer can access the internet at the very same time. Why? The modem does not consist of the NAT function.

The NAT (Network Handle Translation) is a fundamental attribute of the routers which is to translate and map an IP deal with or a lot more to one particular or far more IP handle in various networks. Usually in home router, the NAT characteristic is utilized to map a solitary public IP tackle furnished by your ISP to a single or more non-public IP addresses powering the router (which is your internal network). In situation that you have by now bought a wireless entry point and your customer pcs can’t share the internet, your modem isn’t going to incorporate the NAT function. What you need to have is a modem with router operate this kind of as TDM-C500 ADSL2 modem router.

TDM-C500 is an ADSL2 modem with router perform. The modem consists of the dual firewall functions – the NAT and SPI (stateful packet inspection). The NAT function will help you conceal your inner network from the wild web and to share your ADSL broadband internet connection with many computer systems in the network.

TDM-C500 ADSL2 modem router contain one particular 10/100Mbps Vehicle-MDIX RJ-45 port you can use to connect the wireless accessibility stage these kinds of as TEW-690AP N450 Wireless Access Level really should you need to have to grow the network wirelessly. Considering that this TDM-C500 modem includes the router function, you will not need to have a wireless router for developing wireless network, just connect a wireless accessibility position to share the broadband internet connection.

There are some wireless routers that can be switched to access stage mode this kind of as WZR-HP-G300NH Buffalo Nfiniti Wireless-N Router &amp Entry Level. It consists of external switch to adjust between router and entry point modes. Some router suppliers offer guidelines in connecting the router to yet another router (which includes this ADSL2 modem router) such as disabling the DHCP server, disabling the UPnP, and modifying the IP handle that is in the very same subnet with your present network.

Or you can connect the modem direct to the Switch ought to you need to grow the wired connections to the web. The good issue with this TDM-C500 ADSL2 modem router is that it includes the DHCP server. With the DHCP server, you don’t need to have to offer the static IP deal with manually to all of the consumer pcs in the network. This will minimize the complexity of IP deal with administration.

Alternate Resolution

The TDM-C500 ADSL2 modem router gives you the versatility in picking the wireless entry level to produce a wireless network in houses or in offices. You can link the out of doors wireless access level (this kind of as TL-WA5210G Substantial Power Wireless Outdoor CPE) to present wireless internet accessibility for client pcs in harsh out of doors surroundings. This is typically ideal for web site jobs with several personal computer customers separated hundreds of meters from the primary website.

For property environments where web entry and other wireless networking jobs are needed, as a substitute of acquiring separate TDM-C500 ADSL2 modem router in addition wireless entry stage device you can think about getting the all-in-1 device which consists of all the specifications for creating a wireless LAN. For case in point, TEW-635BRM TRENDnet 300Mbps wireless N ADSL2/2+ modem router. TEW-635BRM includes create-in ADSL modem as well as wireless router in a single machine. Or you can contemplate DGND3300 V2 N300 RangeMax dual band ADSL wireless modem. The two ADSL modem wireless routers are made with 802.11n technological innovation, but DGND3300 supports the simultaneous dual band technological innovation to operate both in 2.4GHz and 5GHz frequency bands in the identical time.

TRENDnet TDM-C500 is an ADSL2 modem router – a modem with create-in substantial velocity router perform to reveal the ADSL broadband internet connection with several personal computers in houses or offices. You want to connect a wireless accessibility point device to develop a wireless network.

By Ki Grinsing

Check The Wireless MAC Address Of A Linksys Access Point

Sunday, January 1st, 2012 | Wireless access point with Comments Off

Checking the Wireless MAC Address of a Linksys Wireless Access Position is an easy operation. But it is extremely critical when you have to extend its wireless signal by one more Linksys wireless entry stage machine this kind of WAP54G.

Instruction one: Connect a laptop or computer to your Linksys wireless access stage.

Instruction two: Assign a static IP tackle to your computer’s network adapter. To achieve this on a windows-primarily based personal computer, Open Network Connections (to do this click on on Begin, click on on Control Panel, double-click on on Network Connections), right-click on the connection you want to setup, click on Properties, beneath the Standard tab and in This connection uses the following objects, click Web Protocol (TCP/IP), and then click on Attributes. Lastly, Click on Use the subsequent IP address, enter the static IP deal with for the network adapter in the IP tackle subject, and then click on Ok.

Instruction three: Open your Linksys wireless access point’s world wide web-primarily based setup interface.

Instruction 4: When your Linksys wireless entry point’s internet-centered setup interface appears, take notice of its Wireless MAC Deal with. Retain in mind that you can use this wireless MAC address if you will setup the Linksys access stage WAP54G as wireless repeater.

Maintain in thoughts that you can setup a Linksys wireless-G entry position as an accessibility position, wireless bridge, wireless repeater, and wireless entry level consumer. By default, the Linksys wireless repeater mode turns a Linksys wireless-g access level system such as WAP54G into a wireless repeater that you can use to extend the assortment of your wireless signal developed by a Linksys wireless router or a Linksys wireless entry position on your nearby network. In addition, a Linksys wireless entry point this sort of as WAP54G is in a position to operate as a wireless repeater with the Linksys wireless devices these kinds of as Linksys Wireless-G Accessibility Stage WAP54G and Linksys Wireless Router WRT54G.

Advantages of a Linksys Wireless Access Point

Thursday, August 11th, 2011 | Wireless access point with Comments Off

When it comes to computer networks, the wireless access point from Linksys is the preferred choice of those who want the best wireless broadband connection that is easy to install and configure. It should be understood that a wireless access point or WAP allow other communication devices to connect wirelessly to a network. This would include favorite portable, smart phones, GPS devices or any other device that uses Wi-Fi, Bluetooth or any other related technology. Homes, schools and offices that want to establish a computer network used to rely on routers to create a cable network. While cable networks are still the champion when it comes to speed and efficiency, a wireless network is easy to configure and offers total freedom to any computer network.

They are not cheap wireless routers on the market that can be too slow for demanding Internet user. However, the Linksys wireless access point is designed to be used with a Linksys wireless router or other brands to provide a fast and reliable connection. The quality of the router is equally important as that is where the main connection (also called Ethernet) will be. It is also important to know that a wireless access point may be similar to a wireless router, but both are equally important in establishing a quality home or office.
Read the rest of this entry »

DAP-2555 Dual Band POE Access Point Does It Fit to Your Business

Monday, August 1st, 2011 | Wireless access point with No Comments »

D-Url DAP-2555 AirPremier N Dual Band PoE Accessibility Level is driven by entire functions of enterprise class wireless entry stage which includes Cloud Command technological innovation for easy management from everywhere through the internet. It also supports advanced protection such as firewalled visitor network and two factor authentication. Does it fit to your business?

In small to medium companies, wireless access is one particular of the important services that primarily organizations present to support the productivity of the worker with their mobile gadgets including laptop computer, iPad, intelligent-phone etc. They can perform almost everywhere and keep related to the network even though away from their desks. With the expanding quantity of the knowledge targeted traffic and the bigger place to cover, many access factors are needed to deploy. And with the company enlargement to many areas, the complication of multiple accessibility level deployment and management across the areas turns into clear. Read the rest of this entry »

Dap-2690 A Dual Band Access Point with Advanced Business Class Security Features

Friday, July 1st, 2011 | Wireless access point with Comments Off

DAP-2690 is made for enterprise class networks. Really should you require a multifunction wireless entry stage for properties or SOHO – take into account DAP-1360 assortment extender. DAP-1360 has the same multi-operation modes as DAP-2690 does, but DAP-2690 has a lot more superior protection characteristics for enterprise class networks. Or if you are not confident whether or not you want a wireless router or a wireless AP for your house network, you can take into account ASUS Rt-N13u. Asus Rt-N13u is a solitary device with entry position and router features.

In contrast to its predecessor DAP-2590 AirPremier accessibility level which is made with selectable twin-band, DAP-2690 AirPremier access level is designed with simultaneous dual-band. With simultaneous dual-band, your wireless environment will help all the wireless clients with mixed frequency bands (two.4 GHz and 5 GHz) at the very same time. 5 GHz frequency band is usually used for video and gaming application which is clearer band than two.4 GHz band. There are many resources of signal attenuator that operates in 2.four GHz band which interfere with your wireless gadgets which run in 2.four GHz band this sort of as microwave oven, garage controller, baby keep an eye on and far more. If your environment will be utilised solely for multimedia visitors (movie or voice), think about DAP-2590 which can be picked to function in five GHz.

Read the rest of this entry »